The Development of a Sampling System for Determining Odor Emission Rates from Areal Surfaces: Part I. Aerodynamic Performance

Abstract

An improved portable odor sampling system (OSS) of the wind tunnel type was designed to determine odor emissions from areal sources. The aerodynamics of the odor emission hood was observed using a number of smoke tests and dry ice tests. The velocity profiles were also measured horizontally and vertically in the hood by an anemometer. Modifications in the form of an extension inlet duct, flat vanes, and a baffle were necessary to achieve repeatable, uniform, and steady velocity profiles inside the hood. The optimum velocity for use of the OSS was found to be 0.33 m/s, based upon the aerodynamic performance of the OSS and the sensitivity of the anemometer at a lower velocity.     

Formation of secondary inorganic aerosols by power plant emissions exhausted through cooling towers in Saxony

Background, aim, and scope  The fraction of ambient PM₁₀ that is due to the formation of secondary inorganic particulate sulfate and nitrate from the emissions of two large, brown-coal-fired power stations in Saxony (East Germany) is examined. The power stations are equipped with natural-draft cooling towers. The flue gases are directly piped into the cooling towers, thereby receiving an additionally intensified uplift. The exhausted gas-steam mixture contains the gases CO, CO₂, NO, NO₂, and SO₂, the directly emitted primary particles, and additionally, an excess of ‘free’ sulfate ions in water solution, which, after the desulfurization steps, remain non-neutralized by cations. The precursor gases NO₂ and SO₂ are capable of forming nitric and sulfuric acid by several pathways. The acids can be neutralized by ammonia and generate secondary particulate matter by heterogeneous condensation on preexisting particles. Materials and methods  The simulations are performed by a nested and multi-scale application of the online-coupled model system LM-MUSCAT. The Local Model (LM; recently renamed as COSMO) of the German Weather Service performs the meteorological processes, while the Multi-scale Atmospheric Transport Model (MUSCAT) includes the transport, the gas phase chemistry, as well as the aerosol chemistry (thermodynamic ammonium–sulfate–nitrate–water system). The highest horizontal resolution in the inner region of Saxony is 0.7 km. One summer and one winter episode, each realizing 5 weeks of the year 2002, are simulated twice, with the cooling tower emissions switched on and off, respectively. This procedure serves to identify the direct and indirect influences of the single plumes on the formation and distribution of the secondary inorganic aerosols. Results and conclusions  Surface traces of the individual tower plumes can be located and distinguished, especially in the well-mixed boundary layer in daytime. At night, the plumes are decoupled from the surface. In no case does the resulting contribution of the cooling tower emissions to PM₁₀ significantly exceed 15 μgm⁻³ at the surface. These extreme values are obtained in narrow plumes on intensive summer conditions, whereas different situations with lower turbulence (night, winter) remain below this value. About 90% of the PM₁₀ concentrations in the plumes are secondarily formed sulfate, mainly ammonium sulfate, and about 10% originate from the primarily emitted particles. Under the assumptions made, ammonium nitrate plays a rather marginal role. Recommendations and perspectives  The analyzed results depend on the specific emission data of power plants with flue gas emissions piped through the cooling towers. The emitted fraction of ‘free’ sulfate ions remaining in excess after the desulfurization steps plays an important role at the formation of secondary aerosols and therefore has to be measured carefully.     

The functional and physiological status of Gammarus fossarum (Crustacea; Amphipoda) exposed to secondary treated wastewater

Climate change scenarios predict lower flow rates during summer that may lead to higher proportions of wastewater in small and medium sized streams. Moreover, micropollutants (e.g. pharmaceuticals and other contaminants) continuously enter aquatic environments via treated wastewater. However, there is a paucity of knowledge, whether extended exposure to secondary treated wastewater disrupts important ecosystem functions, e.g. leaf breakdown. Therefore, the amphipod shredder Gammarus fossarum was exposed to natural stream water (n = 34) and secondary treated wastewater (n = 32) for four weeks in a semi-static test system under laboratory conditions. G. fossarum exposed to wastewater showed significant reductions in feeding rate (25%), absolute consumption (35%), food assimilation (50%), dry weight (18%) and lipid content (22%). Thus, high proportions of wastewater in the stream flow may affect both the breakdown rates of leaf material and thus the availability of energy for the aquatic food web as well as the energy budget of G. fossarum.     

Effect of biosolid hydrochar on toxicity to earthworms and brine shrimp

The hydrothermal carbonization of sewage sludge has been studied as an alternative technique for the conversion of sewage sludge into value-added products, such as soil amendments. We tested the toxicity of biosolid hydrochar (Sewchar) to earthworms. Additionally, the toxicity of Sewchar process water filtrate with and without pH adjustment was assessed, using brine shrimps as a model organism. For a Sewchar application of 40 Mg ha^?1, the earthworms significantly preferred the side of the vessel with the reference soil (control) over side of the vessel with the Sewchar treatments. There was no acute toxicity of Sewchar to earthworms within the studied concentration range (up to 80 Mg ha^?1). Regarding the Sewchar process water filtrate, the median lethal concentration (LC50) to the shrimps was 8.1% for the treatments in which the pH was not adjusted and 54.8% for the treatments in which the pH was adjusted to 8.5. The lethality to the shrimps significantly increased as the amount of Sewchar process water filtrate increased. In the future, specific toxic substances in Sewchar and its process water filtrate, as well as their interactions with soil properties and their impacts on organisms, should be elucidated. Additionally, it should be identified whether the amount of the toxic compounds satisfies the corresponding legal requirements for the safe application of Sewchar and its process water filtrate.     

Determination of polyfluoroalkyl compounds in water and suspended particulate matter in the river Elbe and North Sea, Germany

The distribution of polyfluoroalkyl compounds (PFCs) in the dissolved and particulate phase and their discharge from the river Elbe into the North Sea were studied. The PFCs quantified included C₄-C₈ perfluorinated sulfonates (PFSAs), 6:2 fluorotelomer sulfonate (6:2 FTS), C₆ and C₈ perfluorinated sulfinates (PFSiAs), C₄-C₁₂ perfluorinated carboxylic acids (PFCAs), perfluoro-3,7-dimethyl-octanoic acid (3,7m₂-PFOA), perfluorooctane sulfonamide (FOSA), and n-ethyl perfluroctane sulfonamidoethanol (EtFOSE). PFCs were mostly distributed in the dissolved phase, where perfluorooctanoic acid (PFOA) dominated with 2.9–12.5 ng/L. In the suspended particulate matter FOSA and perfluorooctane sulfonate (PFOS) showed the highest concentrations (4.0 ng/L and 2.3 ng/L, respectively). The total flux of ΣPFCs from the river Elbe was estimated to be 802 kg/year for the dissolved phase and 152 kg/year for the particulate phase. This indicates that the river Elbe acts as a source of PFCs into the North Sea. However, the concentrations of perfluorobutane sulfonate (PFBS) and perfluorobutanoic acid (PFBA) in the North Sea were higher than that in the river Elbe, thus an alternative source must exist for these compounds.     

Influence of permeability on nanoscale zero-valent iron particle transport in saturated homogeneous and heterogeneous porous media

Environmental Science and Pollution Research - Nanoscale zero-valent iron (NZVI) particles can be used for in situ groundwater remediation. The spatial particle distribution plays a very important...     

Polyfluorinated compounds in the atmosphere along a cruise pathway from the Japan Sea to the Arctic Ocean

Neutral polyfluorinated alkyl substances (PFASs) were measured in high-volume air samples collected on board the research vessel Snow Dragon during the 4th Chinese National Arctic Expedition from the Japan Sea to the Arctic Ocean in 2010. Four volatile and semi-volatile PFASs (fluorotelomer alcohols (FTOHs), fluorotelomer acids (FTAs), perfluoroalkyl sulfonamides (FASAs), and sulfonamidoethanols (FASEs)) were analyzed respectively in the gas and particle phases. FTOHs were the dominant PFASs in the gas phase (61-358 pg m⁻³), followed by FTAs (5.2-47.9 pg m⁻³), FASEs (1.9-15.0 pg m⁻³), and FASAs (0.5-2.1 pg m⁻³). In the particle phase, the dominant PFAS class was FTOHs (1.0-9.9 pg m⁻³). The particle-associated fraction followed the general trend of FASEs > FASAs > FTOHs. Compared with other atmospheric PFAS measurements, the ranges of concentrations of ∑FTOH in this study were similar to those reported from Toronto, north America (urban), the northeast Atlantic Ocean, and northern Germany. Significant correlations between FASEs in the gas phase and ambient air temperature indicate that cold surfaces such as sea-ice, snowpack, and surface seawater influence atmospheric FASEs.     

Climate Response by the Ski Industry: The Shortcomings of Snowmaking for Australian Resorts

Skier numbers, and revenues for the multi-billion-dollar ski industry, are highly sensitive to snow cover. Previous research projected that under climate change, natural snow cover will become inadequate at 65% of sites in the Australian ski resorts by 2020. Resorts plan to compensate for reduced snowfall through additional snowmaking. For the six main resorts, however, this would require over 700 additional snow guns by 2020, requiring approximately US $100 million in capital investment, and 2,500-3,300 ML of water per month, as well as increased energy consumption. This is not practically feasible, especially as less water will be available. Therefore, low altitude ski resorts such as these may not be able to rely on snowmaking even for short-term adaptation to climate change. Instead, they are likely to seek conversion to summer activities and increased property development.